The little Giant Pool Cover Pump Not Working

If you’ve ever had a pool, you know that keeping it clean can be a chore. One of the most important pieces of equipment for keeping your pool clean is the pool cover pump. This device helps to remove water from your pool cover so that it doesn’t become a breeding ground for bacteria and other contaminants.

Unfortunately, sometimes pool cover pumps can stop working properly. If your pool cover pump isn’t working, there are a few things you can do to try to fix the problem.

First, make sure that the pump is properly plugged in and that the power switch is turned on. If the pump still doesn’t work, check to see if there is anything blocking the intake or discharge ports. Sometimes leaves or other debris can get caught in the pump and prevent it from working properly.

If you can’t find any obvious reason why the pump isn’t working, you may need to take it apart and clean it. Be sure to unplug the pump before you do any disassembly. Once you have the pump apart, check for any debris or buildup that may be causing the problem. If you find anything, clean it out and reassemble the pump.

Once you’ve checked all of the obvious things, if the pump still isn’t working, you may need to replace it. Fortunately, pool cover pumps are relatively inexpensive and easy to find. You should be able to find a new one at your local hardware store or online.

If your pool cover pump stops working, don’t despair. With a little troubleshooting, you should be able to get it up and running again in no time.

Why Do I Need a Cover Pump in the First Place?

A cover pump is an essential piece of equipment for any pool owner. Without a cover pump, your pool would be susceptible to all sorts of dirt and debris, not to mention the potential for leaves and other organic matter to fall in and contaminate the water. A cover pump helps to keep your pool clean by circulating the water and filtering out any impurities. It also helps to prevent evaporation, which can lead to water loss and an increase in your water bill. Cover pumps are not expensive, and they can save you a lot of money in the long run. If you are a pool owner, be sure to invest in a cover pump to keep your pool clean and safe for swimming.

Pump Comes On but Doesn’t Remove Water

If you notice that your pump is coming on but not removing water, there are a few things you can check. First, make sure that there is no debris blocking the intake or outlet of the pump. Sometimes leaves or other debris can fall into the water and block the pump from working properly. If the pump is clear, then the next thing to check is the water level. If the water level is too low, the pump will not be able to remove all the water and will need to be refilled. If you have checked the pump and the water level and both seem to be fine, then the problem may be with the pressure switch. The pressure switch is what tells the pump to turn on and off. If the pressure switch is not working properly, it may need to be replaced. If you are still having problems with your pump, it is best to call a professional. They will be able to diagnose the problem and get your pump working properly again.

Leave a Comment

Your email address will not be published. Required fields are marked *